Airtac Adjustable Cylinder SAIJ32 SAIJ32BX140-50S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX140-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 140mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke140 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX140-50S
The AirTAC SAIJ32X140-50-S is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It delivers 402N of push force and 345N of pull force at 0.5MPa. The integrated -50 adjustment mechanism creates a usable travel window of 90-140mm, enabling precise end-position tuning without adding external stops.
This specific configuration features a SUS304 stainless steel rod (code B) and a PT tapered port thread, making it highly suitable for environments where corrosion resistance is paramount. The extruded aluminum barrel includes sensor grooves on both sides, and because this is an -S model, it contains a magnet ready for CMSE reed and DMSE electronic solid-state switches. The rear adjuster acts strictly as a travel stop to set deceleration, not as a load-holding lock.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX140-50S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX140-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX140-50S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX140-50S Is Used
Machine Changeover
Dial in the 90-140mm travel window on the fly to accommodate different product lengths during line changeovers without swapping hardware.
Commissioning Calibration
Fine-tune the retract end-position during initial setup, using the rear stopper to perfect the stroke without adding external shims.
End-Stop Trimming
Achieve exact positioning for automated assembly tasks by adjusting the effective stroke up to 50mm to meet exact dimensional tolerances.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX140-50S the Right Cylinder?
Choose this 32mm bore adjustable-stroke cylinder when your application requires exact end-position tuning at commissioning or during product-size changeovers, rather than relying on a fixed-stroke SAI variant. If your setup needs less force, stepping down is not an option within this series, but stepping up to a 40mm bore yields 628N of push force at 0.5MPa. For load-holding without live air pressure, note that the SAIJ adjuster is only a stop; you would need an external rod lock, a pilot-operated check valve, or a related AirTAC type like SAIL or BSAI. This SAIJ32X140-50-S is dimensionally interchangeable per ISO 15552 and uses the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). The 12mm rod and M10x1.25 thread handle moderate side loads, but for any stroke over 300mm, an external guide is recommended.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX140-50S FAQ
The rear adjusting screw acts as an external stopper that lets you shorten the effective stroke by up to 50mm. This creates a usable travel window of 90-140mm, allowing you to fine-tune the retract end-position without replacing the cylinder.
At a 0.5MPa operating pressure, the SAIJ32X140-50-S provides 402N of push force and 345N of pull force. At 0.7MPa, the push force increases to 563N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX140-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.