Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-100S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX145-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 145mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke145 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-100S
Its defining trait is a massive 100mm adjustment range, creating a usable travel window of 45-145mm. This allows operators to dial in the exact end position during commissioning without swapping hardware or adding external stops.
Built with a SUS304 stainless steel rod (option B), this model handles environments where standard carbon steel would corrode. The integrated magnet (-S) supports AirTAC CMSE reed and DMSE electronic sensors, fitting neatly into the dual-side sensor grooves of the extruded aluminum barrel. The rear adjuster acts purely as a travel stop for deceleration, meaning it will not hold a load without continuous live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-100S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-100S Is Used
Variable End-Stop Tuning
Dial in the precise retract distance between 45 and 145mm during machine setup, perfect for testing different actuation depths on the fly.
Product Size Changeovers
Quickly adapt packaging lines to new container sizes by turning the rear adjuster, avoiding the need to physically swap out the entire cylinder.
Corrosion-Resistant Positioning
Leverage the SUS304 stainless steel rod for light-duty pushing tasks in washdown or mildly corrosive manufacturing environments.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-100S the Right Cylinder?
Choose this 32mm bore when an application demands extreme flexibility in end-position tuning, offering a 45-145mm window that far exceeds standard trim ranges. For load-holding without live air, a plain SAIJ is insufficient; you would need to specify a SAIL pneumatic lock or an external rod lock.
To match this exact ISO 15552 footprint for a direct replacement, confirm the 32mm bore, 145mm nominal stroke, 100mm adjustment code, PT tapered port threads, and the -S magnet. Because the nominal stroke is 145mm, side-load risks are minimal, but always ensure the M10x1.25 rod thread is aligned correctly to avoid binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-100S FAQ
If operated at 0.7 MPa, the push force increases to 563N.
The rear adjuster allows you to shorten the effective stroke by up to 100mm. This creates a usable travel window of 45-145mm, letting you fine-tune the end position without changing the cylinder's physical mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.