Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-50S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX145-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 145mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke145 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-50S
The AirTAC SAIJ32X145-50-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster.
This variant features a SUS304 stainless steel rod (option B) for superior corrosion resistance and uses PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated magnet (-S) supports position detection with AirTAC CMSE reed or DMSE electronic solid-state switches.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-50S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-50S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-50S Is Used
Machine Changeover
Quickly fine-tune the 95-145 mm stroke window during product size changes on a packaging line without replacing the cylinder.
Variable End Stops
Dial in the exact retract position on small-bore assembly fixtures where a fixed 145 mm stroke would crash delicate components.
Lab Positioning
Leverage the SUS304 stainless steel rod and adjustable travel for precise, repeatable end-point tuning in corrosive test environments.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-50S the Right Cylinder?
Choose this 32 mm bore when you need precise end-position tuning at machine setup or product changeover without swapping cylinders or adding external stops. The rear adjuster acts purely as a travel stop and cannot hold a load without live air pressure; for true drop-prevention, consider an AirTAC SAIL or BSAI series cylinder.
As a dimensionally interchangeable ISO 15552 cylinder, it matches standard mounting footprints using the Basic, FA, LB, TC, FTC, TCM1, and TCM2 accessory set. It features a 12 mm carbon steel piston rod, M10x1.25 rod threading, G1/8 port, and operates at speeds from 30 to 800 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-50S FAQ
The rear adjusting screw acts as a mechanical stopper, allowing you to shorten the effective stroke by up to 50 mm. This creates a usable travel window of 95 to 145 mm, which is ideal for fine-tuning end positions at commissioning without adding external stops.
The maximum thrust is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX145-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.