Airtac Adjustable Cylinder SAIJ32 SAIJ32BX15-10S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX15-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 15mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke15 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX15-10S
The AirTAC SAIJ32X15-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a highly precise 5-15 mm usable travel window. Delivering 402 N of push force at 0.5 MPa, it is built with a SUS304 stainless steel rod and includes a magnet for CMSE and DMSE sensors. The PT tapered ports ensure a tight, reliable pneumatic connection.
This adjustable-stroke model allows you to fine-tune the end position at commissioning without swapping the cylinder or adding external stops. The rear adjuster acts purely as a travel stop to set the retraction end, not as a lock, meaning it will not hold the load without live air pressure. It uses a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX15-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX15-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX15-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX15-10S Is Used
Precision Clamping
Dial in the exact 5-15 mm travel needed to clamp delicate workpieces without crushing them during machine setup.
Sensor Actuation
Use the fine rear adjustment to perfectly position the integrated magnet for triggering CMSE or DMSE switches.
Product Changeover
Quickly reconfigure the end-stop position on a packaging line when handling different product sizes, avoiding mechanical rebuilds.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX15-10S the Right Cylinder?
Choose this 32 mm bore when you need 402 N push force at 0.5 MPa with a very short, finely tunable travel window. If your application requires less force, dropping down to a smaller bore is an option, but if you need more power, stepping up to a 40 mm bore yields 628 N push force at 0.5 MPa. The integrated magnet works seamlessly with CMSE reed and DMSE electronic switches for position sensing.
Because the nominal stroke is only 15 mm, side-load risks are minimal, but always ensure the load is guided on any stroke. To replace an ISO 15552 cylinder, match the 32 mm bore, 15 mm stroke, 10 mm adjustment, PT G1/8 port, and the -S magnet requirement. For load-holding without live air, consider the SAIL or BSAI series instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX15-10S FAQ
The rear adjuster screw lets you trim the effective stroke by up to 10 mm. With a 15 mm nominal stroke, this gives a usable travel window of 5-15 mm, allowing precise end-position tuning at commissioning without external stops.
At 0.5 MPa operating pressure, it provides 402 N of push force and 345 N of pull force. It can reach up to 724 N push force at its maximum 0.9 MPa pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX15-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.