Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-10
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX160-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke160 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-10
The AirTAC SAIJ32X160-10 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 160 mm nominal travel by up to 10 mm for a precise 150-160 mm usable window.
This variant features a SUS304 stainless steel rod for superior corrosion resistance and uses PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, though this specific SKU is configured without a magnet for position sensing.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-10 Is Used
End-Stop Calibration
Perfect for dialing in the exact retraction point within the 150-160 mm window during machine setup, ensuring parts are seated perfectly without repositioning physical hard stops.
Product Changeover
Enables rapid adjustment of the rear travel limit on packaging lines when switching between slightly different product sizes, minimizing downtime.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-10 the Right Cylinder?
Choose this 32 mm bore when you need finer end-position control during commissioning than a fixed-stroke SAI cylinder provides, without adding external stops. Remember that the rear adjuster functions strictly as a travel stop, not a locking device; the cylinder cannot hold a load without live air, so consider an external rod lock or a SAIL cylinder for true load-holding.
To match this ISO 15552 interchangeable cylinder, confirm your requirements for a 160 mm stroke, 10 mm adjustment range, PT G1/8 port, and your preferred mounting bracket from the available Basic, FA, LB, TC, FTC, TCM1, and TCM2 set. Since the 160 mm stroke is relatively short for this bore, side-loading concerns are minimal, but always ensure proper alignment to maximize seal life.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-10 FAQ
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke from the nominal 160 mm down to 150 mm. This provides a 10 mm tuning window at commissioning without needing to swap the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.