Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-10S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke160 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-10S
The AirTAC SAIJ32X160-10-S is a double-acting, adjustable-stroke ISO 15552 profile cylinder. A rear stopper screw lets you fine-tune the retract end-position, creating a usable travel window of 150-160 mm for this 160 mm nominal stroke. It delivers 402 N of push force and 345 N of pull force at 0.5 MPa, fitting compact automation tasks.
This variant features a SUS304 stainless steel rod for superior corrosion resistance and includes a magnet for CMSE reed and DMSE electronic sensors. The extruded aluminum barrel includes sensor grooves on both sides. It uses a PT tapered G1/8 port and provides variable air cushioning at both ends to dampen impacts.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-10S Is Used
End-Position Tuning
Dial in the exact 150-160 mm retract distance during machine setup to compensate for mechanical wear or sensor drift.
Product Changeover
Quickly adjust the stroke stop on a packaging line when switching to a different package size without swapping cylinders.
Compact Assembly
Utilize the 32 mm bore and 402 N force for light clamping or pressing tasks where a stainless rod prevents corrosion.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-10S the Right Cylinder?
Choose this 32 mm bore when you need precise end-stop tuning during commissioning without adding external stops. If your process requires higher force, stepping up to the 40 mm bore yields 628 N push force at 0.5 MPa. Conversely, if your force needs are lower, dropping to a smaller bore reduces physical envelope. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure; for true load-holding, consider the SAIL or BSAI series.
For an exact ISO 15552 replacement, match the 32 mm bore, 160 mm stroke, 10 mm adjustment range, PT G1/8 port, and the -S magnet requirement. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the 160 mm stroke is under 300 mm, side-load stress is moderate, but the 12 mm rod and M10x1.25 thread still require external guidance for heavy radial loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-10S FAQ
At 0.5 MPa, it provides 402 N of push force and 345 N of pull force. At the maximum operating pressure of 1.0 MPa, it can deliver up to 82 kgf.
The rear adjuster screw lets you shorten the effective stroke by up to 10 mm, providing a usable travel window of 150 to 160 mm. This stopper only sets the end position; it does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.