Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-40S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX160-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke160 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-40S
The AirTAC SAIJ32X160-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 120-160 mm usable travel window from its 160 mm nominal stroke. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting.
This unit uses a SUS304 stainless steel rod for superior corrosion resistance and PT tapered ports for a tight seal. The rear adjuster acts purely as a mechanical stop to fine-tune the retract position at commissioning; it does not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-40S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-40S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-40S Is Used
Product Changeover
Dial in the 120-160 mm travel window during line size changes without physically replacing the cylinder or adding external mechanical stops.
End-Position Tuning
Fine-tune the retract stroke at commissioning to absorb minor mechanical tolerances and achieve exact positioning of the 12 mm rod.
Corrosive Environments
Leverage the SUS304 stainless steel rod for light-duty testing or packaging tasks where moisture resistance is critical to component longevity.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-40S the Right Cylinder?
The adjustable stroke is ideal for dialing in exact positioning without swapping cylinders, unlike a fixed-stroke SAI model.
To match this ISO 15552 replacement exactly, use a 32 mm bore, 160 mm stroke, 40 mm adjustment range, PT port threads, and a -S magnet for CMSE or DMSE sensors. The 12 mm rod and M10x1.25 thread handle moderate side loads, but because the stroke is 160 mm, ensure proper guidance to prevent rod binding. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-40S FAQ
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The rear adjuster acts as a mechanical stop that lets you shorten the 160 mm nominal stroke by up to 40 mm, creating a 120-160 mm travel window. It only sets the end position and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX160-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.