Airtac Adjustable Cylinder SAIJ32 SAIJ32BX165-30
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX165-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke165 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX165-30
The AirTAC SAIJ32X165-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 135-165 mm usable travel window, allowing you to dial back the nominal 165 mm stroke by up to 30 mm during commissioning.
This variant features a SUS304 stainless steel rod for superior corrosion resistance and uses PT tapered port threads with a G1/8 connection. The extruded aluminum barrel includes sensor grooves on both sides, though this specific SKU is configured without a magnet for electronic or reed switching.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX165-30 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX165-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX165-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX165-30 Is Used
Product Changeover
Quickly fine-tune the 135-165 mm travel window during production line changeovers to accommodate slightly different package sizes without changing the cylinder.
Machine Setup
Dial in the exact end-stop position during initial commissioning using the rear adjuster, avoiding the need to add external shims or spacers.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX165-30 the Right Cylinder?
Choose this 32 mm bore when an application requires precise end-position tuning without swapping out physical components; its 30 mm adjustment window easily accommodates product changeovers. If your setup needs greater thrust, stepping up to the 40 mm bore increases push force to 628 N at 0.5 MPa. Because the stroke is 165 mm, external guidance is recommended to manage side loads.
This adjustable model is preferred over a fixed SAI cylinder when machinery requires variable end-stops. Remember that the rear adjuster functions strictly as a travel stop, not a lock; the cylinder cannot hold a load without live air. For load-holding without pressure, consider an external pilot-operated check valve or the SAIL series. This unit is dimensionally interchangeable per ISO 15552.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX165-30 FAQ
The rear adjusting screw acts as a mechanical stopper, allowing you to shorten the effective stroke from the nominal 165 mm down to 135 mm. It only sets the travel end and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX165-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.