Airtac Adjustable Cylinder SAIJ32 SAIJ32BX180-50
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX180-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 180mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke180 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX180-50
The AirTAC SAIJ32X180-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that trims the effective travel. With a 180mm nominal stroke and a 50mm adjustment range, it provides a usable travel window of 130-180mm. This allows precise end-position tuning at commissioning without adding external stops.
This model incorporates a SUS304 stainless steel rod for superior corrosion resistance and uses a PT tapered port thread. The extruded aluminum barrel includes sensor grooves on both sides, ready for AirTAC CMSE reed and DMSE electronic sensors. The rear adjuster acts strictly as a travel stop for deceleration alongside the variable air cushions, meaning it will not hold a load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX180-50 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX180-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX180-50
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX180-50 Is Used
Product Changeover
Dial in the 130-180mm travel window to accommodate different package lengths on a packaging line without changing the cylinder.
End-Position Tuning
Fine-tune the retract end-position during machine commissioning to avoid mechanical interference and perfect the timing.
Variable End Stops
Set custom stroke limits on the fly for testing different physical components or calibrating automated assembly stations.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX180-50 the Right Cylinder?
An adjustable stroke is ideal for setups requiring fine-tuning without swapping the cylinder, unlike a fixed SAI model. Since the rear adjuster only sets the travel end and is not a lock, use a SAIL or BSAI cylinder if your application requires load-holding without live air. For an exact ISO 15552 replacement match, verify the 32mm bore, 180mm stroke, 50mm adjustment, PT G1/8 port, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX180-50 FAQ
At the maximum 1.0MPa pressure, the push force reaches 724N.
The rear adjuster allows you to shorten the 180mm nominal stroke by up to 50mm, creating a usable travel window of 130-180mm. It functions as a mechanical stop to set the end position and does not lock the load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX180-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.