Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-10
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 195mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke195 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-10
The AirTAC SAIJ32X195-10 is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 185-195 mm usable travel window, allowing you to trim the 195 mm nominal stroke by up to 10 mm during commissioning. In the 32 mm bore class, it delivers 402 N of push force at 0.5 MPa.
This model features a SUS304 stainless steel rod for superior corrosion resistance and operates at 30-800 mm/s. The extruded aluminum barrel includes sensor grooves on both sides, though this specific SKU omits the magnet for electronic position sensing.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-10 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-10 Is Used
Commissioning Fine-Tuning
Dial in the exact 185-195 mm end-of-stroke position during machine setup to perfect product alignment without machining new hard stops.
Product Changeover
Quickly adjust the retract distance on a packaging line when switching between different package sizes that require slightly different stroke lengths.
Sensor Calibration
Set precise mechanical stops to trigger position sensors accurately, ensuring repeatable performance in automated assembly tasks.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-10 the Right Cylinder?
Choose this adjustable-stroke cylinder when you need precise end-position tuning without swapping components or adding external stops. If your application requires less force, stepping down is not an option below 32 mm, but stepping up to a 40 mm bore yields 628 N of push force at 0.5 MPa. Because the 195 mm stroke approaches the mid-range for this bore, ensure adequate external guiding if side loads are present.
For ISO 15552 replacement matching, verify the 32 mm bore, 195 mm stroke, 10 mm adjustment, PT tapered port threads, and the absence of a sensor magnet (-S). Remember that the rear adjuster acts only as a travel stop; it does not hold the load without continuous air pressure. For load-holding requirements, consider an external pilot-operated check valve or the SAIL series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-10 FAQ
At 0.5 MPa operating pressure, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 10 mm, creating a usable travel window of 185 to 195 mm. This stopper decelerates the piston at the retract end but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.