Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-100
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 195mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke195 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-100
The AirTAC SAIJ32X195-100 is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It delivers 402 N of push force at 0.5 MPa and features a generous 100 mm adjustment range, creating a usable travel window of 95-195 mm. This built-in adjustability allows you to dial in the exact retract end-position during commissioning without adding external stops or swapping the cylinder.
Built with a SUS304 stainless steel rod for corrosion resistance, this 32 mm bore unit uses PT tapered ports and runs at speeds of 30-800 mm/s. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if you add a magnet later. It carries the standard SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB and CR brackets.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-100 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-100 Is Used
Product Changeovers
Quickly reconfigure the retract end-stop from 95 to 195 mm when switching between different product lengths on the same packaging line.
End-Position Tuning
Fine-tune the final resting position of the rod during machine commissioning without fabricating or installing external mechanical stops.
Variable Assembly Stops
Adjust the cylinder stroke on the fly to accommodate varying component sizes during automated assembly operations.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-100 the Right Cylinder?
Choose this 32 mm bore model when your application requires 402 N of push force at 0.5 MPa and you need to frequently reconfigure end-stops for product changeovers. If your process demands less force, stepping down is not an option in this footprint, but if you need significantly more thrust, the 40 mm bore offers 628 N. The 100 mm adjustment range on this 195 mm stroke cylinder is ideal for machines running multiple product sizes, as the rear screw acts as a travel stop to fine-tune the retract position quickly.
Because the rear adjuster and the variable air cushions only decelerate the load, this cylinder will not hold its position without live air pressure. For fail-safe load holding, consider the SAIL or BSAI series. When replacing an ISO 15552 cylinder, match the 32 mm bore, 195 mm stroke, PT ports, and the desired mounting bracket. Note that the 12 mm rod and M10x1.25 thread handle moderate side loads, but long strokes still require an external guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-100 FAQ
The rear of the cylinder features an external adjusting screw that acts as a mechanical stop, allowing you to shorten the effective stroke by up to 100 mm. This creates a usable travel window of 95 to 195 mm, which can be fine-tuned during commissioning without replacing the cylinder.
At an operating pressure of 0.5 MPa, the SAIJ32X195-100 provides 402 N of push force and 345 N of pull force. If you need higher thrust, stepping up to the 40 mm bore version increases the push force to 628 N at the same pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.