Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-100S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 195mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke195 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-100S
The AirTAC SAIJ32X195-100-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 100 mm. This yields a usable stroke window of 95-195 mm, enabling precise end-position tuning at commissioning without swapping the cylinder or bolting on external stops. It delivers 402 N of push force at 0.5 MPa and uses a SUS304 stainless steel rod for superior corrosion resistance.
Equipped with a magnet for position sensing, it supports AirTAC CMSE reed and DMSE electronic switches fitted into the dual-side sensor grooves. The 12 mm carbon-steel-derived rod and M10x1.25 thread handle basic loads, but the rear adjuster acts only as a travel stop and does not hold the load without live air. It uses PT tapered ports and omits heavy FB, CA, CB, and CR mounting options in favor of the standard Basic, FA, LB, TC, FTC, TCM1, and TCM2 set.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-100S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-100S Is Used
End-Position Tuning
Dial in the exact retract distance within the 95-195 mm window during machine commissioning without adding external stops.
Product Changeover
Quickly adapt the cylinder stroke on a packaging line when handling different product sizes, reducing downtime.
Variable End Stops
Set precise mechanical limits for light-duty assembly tasks, leveraging the 402 N push force at 0.5 MPa.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-100S the Right Cylinder?
Choose this 32 mm bore adjustable cylinder when your application requires variable end-stops or frequent product-size changeovers, providing a 95-195 mm travel window for exact positioning. If you need higher force, stepping up to a 40 mm bore provides 628 N of push force at 0.5 MPa. The SAIJ32X195-100-S is dimensionally interchangeable per ISO 15552 and configured with a SUS304 rod, PT ports, a 100 mm adjustment range, and a magnet for CMSE/DMSE sensors. For load-holding without live pressure, consider the SAIL or BSAI series instead, as the SAIJ rear adjuster is a stop, not a lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-100S FAQ
The rear adjuster allows you to shorten the nominal 195 mm stroke by up to 100 mm, providing an adjustable travel window of 95-195 mm. The adjuster acts as a mechanical stop to fine-tune the end position and does not lock the load without live air.
It delivers 402 N of push force and 345 N of pull force at 0.5 MPa. The -S suffix indicates a built-in magnet compatible with AirTAC CMSE reed switches and DMSE electronic sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.