Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-20
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX195-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 195mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke195 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-20
The AirTAC SAIJ32X195-20 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 175 to 195 mm, enabling precise end-position tuning during commissioning without external stops.
This variant incorporates a SUS304 stainless steel rod for superior corrosion resistance and uses PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, and it supports a speed range of 30-800 mm/s. The rear adjuster acts purely as a travel stop for deceleration, meaning it cannot hold a load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-20 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-20
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-20 Is Used
Machine Changeover
Dial in the 175-195 mm travel window during product size changes to set new end positions rapidly without replacing the cylinder.
End-Stop Calibration
Fine-tune the retract position during machine commissioning to perfect the physical stop location for delicate assembly tasks.
Variable Diverter
Adjust the stroke on the fly for diverter gates that must reposition slightly for different package sizes on a packaging line.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-20 the Right Cylinder?
The adjustable 175-195 mm window is perfect for product changeovers where the exact end-of-stroke varies slightly, saving you from swapping cylinders. For an ISO 15552 replacement, match the 32 mm bore, 195 mm stroke, 20 mm adjustment, PT G1/8 port, and Basic/FA/LB/TC/FTC/TCM1/TCM2 mounting. Since the stroke is under 300 mm, side-load stress on the 12 mm rod is moderate, though an external guide is still recommended for heavy lateral loads. If you need true load-holding without live air, consider the SAIL or BSAI series instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-20 FAQ
At 0.7 MPa, the push force increases to 563 N. The operational speed range is 30-800 mm/s.
The rear adjuster screw allows you to shorten the effective stroke by up to 20 mm, creating a 175-195 mm usable travel window. It acts as a mechanical stop to tune the end position, but it is not a lock and will not hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX195-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.