Airtac Adjustable Cylinder SAIJ32 SAIJ32BX230-20S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX230-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 230mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke230 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX230-20S
The AirTAC SAIJ32X230-20-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 210 to 230 mm, allowing you to dial back the nominal 230 mm stroke by up to 20 mm during commissioning without adding external stops.
This variant features a SUS304 stainless steel rod for superior corrosion resistance and uses PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated magnet supports AirTAC CMSE reed and DMSE electronic solid-state switches. The rear adjuster acts purely as a travel stop to fine-tune end positions, meaning it does not hold the load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX230-20S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX230-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX230-20S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX230-20S Is Used
Machine Changeover
Fine-tune the 210-230 mm stroke window on the fly during product size changes without physically swapping cylinders or bolting on external stoppers.
End-Stop Calibration
Perfect for dialing in exact retracted positions during initial commissioning, ensuring precise tooling alignment using the rear adjusting screw.
Corrosive Testing
The SUS304 stainless steel rod handles light side loads and provides necessary corrosion resistance for test fixtures or environments with moisture.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX230-20S the Right Cylinder?
The adjustable stroke is ideal for machine setups requiring variable end stops or product changeovers, replacing the need to swap a fixed-stroke SAI cylinder. For load-holding without continuous air pressure, consider the SAIL or BSAI series instead, as this cylinder relies on live air. When replacing an ISO 15552 cylinder, match the 32 mm bore, 230 mm nominal stroke, 20 mm adjustment, PT G1/8 port, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting interface.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX230-20S FAQ
At the maximum operating pressure of 1.0 MPa, it can deliver up to 82 kgf.
The rear adjuster screw lets you shorten the effective travel from the nominal 230 mm down to 210 mm. This creates a 20 mm adjustable window for fine-tuning the retract end position at commissioning, but it acts only as a stop and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX230-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.