Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-10S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 260mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke260 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-10S
The AirTAC SAIJ32X260-10-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that trims travel back by up to 10 mm. This creates a 250-260 mm usable stroke window, allowing you to fine-tune the retract end-position at commissioning without swapping the cylinder or adding external stops. It delivers 563 N of push force at 0.7 MPa, making it ideal for lighter-duty tasks.
This SKU is built with a SUS304 stainless steel rod for superior corrosion resistance and includes a magnet for position sensing. It works seamlessly with AirTAC CMSE reed and DMSE electronic sensors fitted into the dual-side barrel grooves. The extruded aluminum profile uses PT tapered G1/8 ports and omits the FB, CA, CB, and CR mounts, offering the standard SAIJ subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-10S Is Used
End-Position Tuning
Dial in the exact 250-260 mm retract distance during machine commissioning without disassembling the cylinder or adding external mechanical stops.
Product Changeover
Quickly adjust the end-stop by up to 10 mm on packaging lines when switching product sizes, ensuring precise positioning without hardware swaps.
Corrosive Environments
Leverage the SUS304 stainless steel rod and 402 N push force at 0.5 MPa for light-duty testing or handling tasks in washdown or corrosive settings.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-10S the Right Cylinder?
Choose this 32 mm bore when an application requires 563 N of push force at 0.7 MPa with precise end-stop tuning. If you need to step up thrust, the 40 mm bore provides 879 N at the same pressure, while dropping to a smaller bore reduces the footprint. The adjustable 250-260 mm travel window is perfect for machine changeovers where a fixed-stroke SAI cylinder would require mechanical shims.
For a 260 mm stroke, the 12 mm carbon-steel-based rod handles standard loads, but long unsupported strokes still need an external guide to prevent side-loading damage. Remember that the rear adjuster acts only as a travel stop, not a lock; the cylinder cannot hold a load without live air. For true fail-safe load holding, consider the SAIL or BSAI series. Dimensionally interchangeable per ISO 15552, this model is configured with PT ports and a -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-10S FAQ
The rear adjuster acts as an external stopper that lets you shorten the effective stroke by up to 10 mm. This gives the 260 mm nominal stroke a usable travel window of 250-260 mm, but it only decelerates the travel end—it does not lock or hold the load without continuous air pressure.
At 0.7 MPa, the 32 mm bore generates 563 N of push force and 1402 N is available on the 63 mm bore. This -S model includes a magnet for position sensing and works directly with AirTAC CMSE reed switches and DMSE electronic sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.