Airtac Adjustable Cylinder SAIJ32 SAIJ32BX270-10S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX270-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 270mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke270 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX270-10S
The AirTAC SAIJ32X270-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The built-in adjuster provides a usable travel window of 260-270mm, allowing you to fine-tune the retract end-position by up to 10mm without adding external stops.
This unit includes a magnet for position sensing, supporting AirTAC CMSE reed and DMSE electronic switches. It uses a G1/8 PT port and relies on variable air cushions at both ends to decelerate the load. The rear adjuster acts strictly as a travel stop, so it will not hold the load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX270-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX270-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 270 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX270-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX270-10S Is Used
End-Position Tuning
Dial in the exact 260-270mm retract distance during machine commissioning without swapping out the entire cylinder.
Product Changeovers
Quickly adapt end-stops on a production line when handling slightly different package sizes or component heights.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX270-10S the Right Cylinder?
If your setup demands greater thrust, stepping up to the 40mm bore yields 628N. The SAIJ32X270-10-S is ideal for product changeovers where a fixed-stroke SAI cylinder would require manual shimming. To replace an ISO 15552 cylinder, match the 32mm bore, 270mm stroke, 10mm adjustment, G1/8 PT port, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounts.
Because the 270mm stroke is 300mm or less, side-load risks are moderate, but you should still ensure proper guidance for the 12mm rod. For applications needing position holding without live air, consider the SAIL or BSAI series instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX270-10S FAQ
The rear adjuster screw lets you shorten the nominal 270mm stroke by up to 10mm, creating a usable travel window of 260-270mm. This stopper only sets the end position; it does not lock or hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX270-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.