Airtac Adjustable Cylinder SAIJ32 SAIJ32BX275-100
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX275-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 275mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke275 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX275-100
The AirTAC SAIJ32X275-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits a usable travel window of 175 to 275 mm. The piston rod is manufactured from SUS304 stainless steel, providing enhanced corrosion resistance for demanding environments.
This model uses PT tapered ports sized G1/8 and achieves a maximum standard stroke of 1000 mm. The rear adjustment mechanism acts strictly as a travel stop for end-position tuning during commissioning; it does not lock the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX275-100 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX275-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX275-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX275-100 Is Used
Variable End-Stop Positioning
Dial in the exact retract distance between 175 and 275 mm for precise component placement without swapping out the entire actuator.
Product Size Changeover
Quickly adapt machinery stops on a packaging line to accommodate varying package lengths during production transitions.
Machine Setup Commissioning
Fine-tune the travel end during initial machine commissioning to perfect timing and avoid mechanical interference.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX275-100 the Right Cylinder?
Select this 32 mm bore cylinder when an application requires fine-tuning of the retract end-position across a 175-275 mm window without adding external stops. Because this unit lacks a magnet, position sensing via CMSE or DMSE switches is not supported.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 275 mm stroke, 100 mm adjustment range, PT G1/8 ports, and SUS304 rod material. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR styles. Given the 275 mm stroke length, ensure adequate external guiding to prevent excessive rod side-loading.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX275-100 FAQ
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The nominal stroke is 275 mm with a 100 mm adjustment code, creating an adjustable travel window from 175 to 275 mm. The rear adjuster functions as a stop for end-position tuning and does not hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX275-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.