Airtac Adjustable Cylinder SAIJ32 SAIJ32BX325-100S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX325-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 325mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke325 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX325-100S
The AirTAC SAIJ32X325-100-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear mechanical adjuster. It provides a nominal 325 mm stroke that can be dialed back by up to 100 mm, creating a precise 225-325 mm usable travel window for highly flexible machine setups.
This variant includes a SUS304 stainless steel rod for superior corrosion resistance and an integrated magnet (-S) for position sensing. The extruded aluminum barrel houses sensor grooves on both sides, supporting AirTAC CMSE reed and DMSE electronic switches. It uses a PT G1/8 port and relies on adjustable air cushions at both ends to decelerate the moving load smoothly.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX325-100S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX325-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX325-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX325-100S Is Used
Variable End-Stop Positioning
Dial in the exact retract distance between 225 and 325 mm during commissioning to accommodate different material lengths without mechanical rebuilds.
Product Size Changeovers
Quickly adjust the stroke window on packaging lines to handle varying carton sizes, leveraging the 100 mm trim range to maintain precise stopping points.
Light-Duty Sensing Tasks
Utilize the integrated magnet with DMSE electronic sensors to confirm end positions in compact assembly machinery while benefiting from the corrosion-resistant SUS304 rod.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX325-100S the Right Cylinder?
If your setup demands greater thrust, stepping up to the 40 mm bore yields 628 N. The 100 mm adjustment range is perfect for product-size changeovers, allowing you to fine-tune the retract position without swapping cylinders or adding external stops. Because the 325 mm stroke is relatively long for this compact bore, ensure adequate external guiding to prevent excessive side-loading on the rod.
This SKU is dimensionally interchangeable per ISO 15552. To match this configuration exactly, specify the 32 mm bore, 325 mm stroke, 100 mm adjustment, PT G1/8 port, and the -S magnet. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding, consider an AirTAC SAIL or BSAI cylinder. Available mountings include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX325-100S FAQ
At a maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 100 mm, creating a usable travel window of 225 to 325 mm. It acts as a mechanical stop to fine-tune the end position and does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX325-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.