Airtac Adjustable Cylinder SAIJ32 SAIJ32BX350-100
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX350-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 350mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke350 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX350-100
The AirTAC SAIJ32X350-100 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 350 mm stroke that can be dialed back by up to 100 mm, yielding a precise 250-350 mm usable travel window for exact end-position tuning during commissioning.
This variant features a SUS304 stainless steel rod (code B) for superior corrosion resistance and uses PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides. Note that the rear adjuster functions strictly as a travel stop for deceleration, not as a load-holding lock; position holding without live air requires a SAIL or BSAI variant.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX350-100 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX350-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX350-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX350-100 Is Used
Product Changeover
Dial in the 250-350 mm travel window rapidly on packaging lines when switching between different carton sizes, eliminating the need for mechanical spacers.
Variable Diverter
Adjust the stroke length on the fly for a conveyor sorting arm to accommodate different product widths while maintaining a 30-800 mm/s operating speed.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX350-100 the Right Cylinder?
The 100 mm adjustment range allows significant flexibility for product changeovers without swapping cylinders. Conversely, if you need higher clamping forces, consider the 50 mm bore offering 982 N.
Because this model features a 350 mm stroke, the 12 mm rod requires external guidance to prevent excessive side-loading and premature seal wear. When replacing an ISO 15552 cylinder, match the 32 mm bore, 350 mm stroke, 100 mm adjustment, PT port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). No magnet is specified, so CMSE or DMSE sensors cannot be used without adding the -S option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX350-100 FAQ
At the maximum 1.0 MPa pressure, it achieves 82 kgf.
The rear adjuster acts as a mechanical stop that shortens the effective travel. For the SAIJ32X350-100, you can trim the 350 mm nominal stroke back by up to 100 mm, creating a usable 250-350 mm travel window. It only sets the end position and does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX350-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.