Airtac Adjustable Cylinder SAIJ32 SAIJ32BX350-20S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX350-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 350mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke350 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX350-20S
The AirTAC SAIJ32X350-20-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits precise end-position tuning. This model provides a usable travel window of 330-350 mm, allowing you to dial back the 350 mm nominal stroke by up to 20 mm without adding external stops.
Equipped with a magnet for position sensing, it integrates seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches mounted in the dual-side sensor grooves. The extruded aluminum barrel uses PT tapered ports (G1/8), and the rear adjuster functions strictly as a travel stop to set deceleration endpoints, not as a lock to hold the load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX350-20S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX350-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX350-20S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX350-20S Is Used
Machine Changeover
Quickly fine-tune the 330-350 mm travel window during product size transitions without physically swapping out the entire cylinder.
End-Stop Calibration
Dial in the exact retract position during commissioning using the rear adjuster, ensuring precise placement without external mechanical stops.
Variable Position Routing
Accommodate slight variations in package sizes on a conveyor line by adjusting the effective stroke by up to 20 mm on the fly.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX350-20S the Right Cylinder?
Choose this 32 mm bore adjustable cylinder when your setup requires fine-tuning of the retract end during commissioning or product changeover. Because the 350 mm stroke is relatively long for a 32 mm bore, an external guide is recommended to prevent excessive side-loading on the M10x1.25 rod.
This SAIJ variant supports the reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. For exact ISO 15552 replacement matching, verify the 32 mm bore, 350 mm stroke, 20 mm adjustment, PT G1/8 port, and the -S magnet requirement. If true load-holding without live air is needed, consider the SAIL or BSAI series instead of relying on the rear stopper.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX350-20S FAQ
The rear adjuster acts as a mechanical stop that allows you to shorten the effective travel from the nominal 350 mm down to 330 mm. It sets the deceleration endpoint but does not lock or hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX350-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.