Airtac Adjustable Cylinder SAIJ32 SAIJ32BX475-50S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX475-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 475mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke475 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX475-50S
The AirTAC SAIJ32X475-50-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows you to dial in the retract end-position at commissioning without swapping hardware.
Configured with a SUS304 stainless steel rod for superior corrosion resistance and a PT tapered port thread, this model includes a magnet for position sensing. It accepts AirTAC CMSE reed and DMSE electronic solid-state switches in its dual-sided sensor grooves. The extruded aluminum barrel maintains standard ISO 15552 mounting dimensions while omitting the FB, CA, CB, and CR mountings in favor of Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX475-50S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX475-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX475-50S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX475-50S Is Used
Changeover Calibration
Dial in the 425-475mm retract position precisely during machine changeovers without adding external mechanical stops.
Variable End Stops
Sort or divert items on a long conveyor line by fine-tuning the stroke endpoint in 50mm of rear adjustment.
Long-Reach Positioning
Push components into a fixture over a 475mm span, using the SUS304 rod for corrosion resistance in varied environments.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX475-50S the Right Cylinder?
Select this 32mm bore when an application requires exact end-position tuning over a long 475mm travel. The 50mm adjustment window is ideal for product changeovers, whereas a fixed SAI cylinder would require external stops. Because the 475mm stroke is substantial for a 32mm bore, the 12mm rod and M10x1.25 thread will still need an external guide to prevent excessive side-loading on the piston.
To match this ISO 15552 dimensionally interchangeable cylinder, confirm the 475mm stroke, 50mm adjustment, PT ports, and the -S magnet. Remember that the rear adjuster acts only as a travel stop, not a lock; the SAIJ32X475-50-S cannot hold a load without live air, so consider an AirTAC SAIL or BSAI cylinder if true load-holding is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX475-50S FAQ
If operated at 0.7 MPa, the push force increases to 563N.
The rear adjuster screw lets you shorten the effective stroke by up to 50mm from the 475mm nominal length, providing a usable travel window of 425-475mm. This stopper only sets the end position; it does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX475-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.