Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-20S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX600-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke600 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-20S
The AirTAC SAIJ32X600-20-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 580-600 mm usable travel window by dialing back the 600 mm nominal stroke up to 20 mm.
The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed and DMSE electronic switches. Fitted with PT tapered port threads (G1/8), this 32 mm bore unit uses a 12 mm rod and M10x1.25 rod thread. The rear adjuster acts purely as a travel stop for end-position tuning, not a load lock.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-20S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-20S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-20S Is Used
Machine Changeover
Dial in the 580-600 mm end-stop during product size changes without swapping the cylinder or adding external stopper blocks.
Variable End-Stop Positioning
Fine-tune the retract stroke up to 20 mm at commissioning to perfectly align pusher plates on a packaging line.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-20S the Right Cylinder?
Select this 32 mm bore cylinder when you need a 580-600 mm stroke range and fine end-position tuning without adding external stops. For machine changeovers, the adjustable stopper allows quick end-position shifts versus a fixed-stroke SAI cylinder.
Because the 600 mm stroke creates a long unsupported rod, an external guide is recommended to prevent side-load wear. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. This standard profile cylinder does not hold loads without live air; for dead-drop protection, use an external rod lock, SAIL, or BSAI clamp-lock cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-20S FAQ
The rear adjuster lets you shorten the 600 mm nominal stroke by up to 20 mm, providing a 580-600 mm usable travel window. The adjuster acts as a mechanical stop to fine-tune the end position and does not lock the load.
The maximum thrust is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.