Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD63X500
The AirTAC B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD63X500 is a genuine double-acting profile-type standard air cylinder with a Ø63mm bore and 500mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ63 mm
- Stroke500 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD63X500
The B04-SAUD63X500 is an AirTAC double-acting, double-rod profile cylinder. The B04- prefix marks it as the construction-machinery dedicated variant of the SAUD63X500, mechanically identical to the base model. Because a rod exits both ends, the push and pull output is equal at 1402 N each way at 0.5 MPa. The extruded aluminum barrel keeps the body shorter than an ISO 15552 cylinder of the same bore.
You can mount it via Basic, FA flange, or LB foot brackets matching the AirTAC SC series. This SKU lacks a magnet, so it cannot take CMSG or DMSG sensors. For high-heat duties, Viton H seals raise the operating limit to 150 C.
Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD63X500 Technical Specifications
| Model | Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD63X500 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø63 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD63X500
| SAU | Profile-type standard cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD63X500 Is Used
Excavator Panel Pusher
Drives cabin panels on heavy equipment with equal push and pull force, using the twin rods to prevent twist during forming.
Loader Arm Synchronizer
Balances dual tooling attachments on construction machinery, keeping strokes aligned without relying on external rails.
Crane Cam Tripper
Uses the protruding back rod to mechanically trip a limit switch on a heavy-equipment rig, since this unit lacks an internal magnet.
Is the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD63X500 the Right Cylinder?
Size both ways: the 50 mm bore yields 825 N, while the 80 mm bore yields 2268 N, both equal in both directions. Choose this 63 mm double-rod unit when you need anti-rotation guidance, twin tooling, or a back-end cam. It uses FA or LB mounting. Since this is a 500 mm stroke, external guides are recommended to prevent rod bending under side loads. Note that this SKU has no -S magnet and cannot host sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD63X500 FAQ
The B04- prefix designates the construction-machinery dedicated variant of the SAUD63X500, sharing the exact same specs. Force is equal both ways: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa. It uses a 3/8" port.
No, a plain cylinder drifts on air loss; the air cushion only decelerates near stroke end. Use an external rod lock or pilot-operated check valve to hold loads. Also, this SKU lacks the -S magnet, so it cannot host magnetic sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD63X500
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.