Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X100
The AirTAC B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 100mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke100 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X100
The AirTAC B06-SAID100X100 is a double-acting, double-rod ISO 15552 profile cylinder. The "B06-" prefix designates this as AirTAC's battery-manufacturing dedicated variant of the SAID100X100, meaning it is mechanically identical to the base model but tailored for cell, module, and pack assembly lines. Because a rod exits both ends, the annulus area is symmetrical, yielding an equal extend and retract force of 3681 N at 0.5 MPa.
This through-rod design allows you to mount a primary workpiece on the front rod and a position flag or cam on the rear rod for external sensing. The extruded aluminum barrel features sensor grooves on both sides, and with a 25 mm carbon steel rod threaded M20x1.5, it handles substantial side loads. Adjustable air cushions at both ends decelerate the piston smoothly, though it will not hold a load without live air pressure.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X100 Technical Specifications
| Model | Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X100 Is Used
Battery Cell Stacking
Provides equal push and pull force for aligning and pressing battery cells during module stacking, preventing asymmetric loading.
Dual-Station Transfer
Drives two opposing mechanisms simultaneously using both rod ends to shuttle battery tabs or separators between processing stations.
Anti-Rotation Guiding
Keeps heavy battery pack fixtures guided against rotation during horizontal handling, ensuring precise mating of pack components.
Is the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X100 the Right Cylinder?
Choose this 100 mm bore when a battery-handling mechanism requires symmetric force and dual-side guidance, stepping up from a 80 mm bore (2268 N at 0.5 MPa) or down from a 125 mm bore (5734 N). A double-rod cylinder is preferred over a single-rod SAI when the application demands anti-rotation stability or requires driving a secondary mechanism from the rear rod. If your battery stacking fixture must hold position without continuous air pressure, you must add an external pilot-operated check valve or use a BSAID clamp-lock, as the standard cushions only decelerate and do not brake.
This cylinder is dimensionally interchangeable per ISO 15552, offering a direct replacement for other ISO 15552 double-rod cylinders. It uses a PT G1/2 port, accepts mounting accessories from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2), and operates without a magnet since -S is not specified.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X100 FAQ
Because it is a double-rod cylinder, the push and pull forces are equal. It generates 3681 N both ways at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa.
The B06- prefix indicates this is AirTAC's battery-manufacturing dedicated variant of the standard SAID100X100. It is mechanically identical to the base model, maintaining the exact same ISO 15552 dimensions, 100 mm bore, and G1/2 port, but is designated for battery production lines.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.