Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X700
The AirTAC B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X700 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 700mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke700 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X700
The AirTAC B06-SAID100X700 is a double-acting, double-rod ISO 15552 profile cylinder. The B06- prefix marks this as a battery-manufacturing dedicated variant of the SAID100X700, meaning it is mechanically identical to the base model but designated for cell, module and pack assembly lines. Because a rod exits both ends, the annulus area is equal on both sides, yielding a consistent 3681 N of force in both extend and retract directions at 0.5 MPa.
This twin-rod architecture allows you to drive a primary workpiece from the front while using the rear rod end for a position flag, cam, or secondary mechanism. It features an extruded aluminum barrel with sensor grooves on both sides, adjustable air cushions at both ends (36 mm cushion length), and a G1/2 port. The standard carbon steel rod handles high side loads, and the mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X700 Technical Specifications
| Model | Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X700 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X700
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X700 Is Used
Battery Module Transfer
Drives long-stroke linear transfers of battery modules across assembly stations, using the symmetric both-way force to push and pull heavy packs without speed variation.
Twin-Station Actuation
Uses the through-rod design to actuate two synchronized mechanisms in opposite directions simultaneously, ideal for compact tabbing or welding presses.
Anti-Rotation Guiding
Mounts a secondary guide carriage on the rear rod end to prevent rotation during vertical electrode handling, ensuring precise alignment for cell stacking.
Is the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X700 the Right Cylinder?
Choose this 100 mm bore when your battery-handling fixture requires substantial symmetric force (3681 N both ways at 0.5 MPa) over a 700 mm stroke. If your application needs less force, stepping down to the 80 mm bore yields 2268 N each way; if you need more, the 125 mm bore provides 5734 N. A double-rod design is selected over a single-rod SAI when you need dual-side guidance, anti-rotation stability, or rear-rod sensing. For a 700 mm stroke, the extended unsupported length increases rod-bearing bending risk, so an external guide is recommended to prevent premature wear.
This cylinder uses a PT tapered port thread and operates at 30-800 mm/s. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not hold the load. If your battery line must maintain position without live air pressure, you must use an external rod lock, a pilot-operated check valve, or switch to a BSAID clamp-lock cylinder. Dimensionally interchangeable per ISO 15552, it serves as a direct replacement for other ISO 15552 double-rod cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X700 FAQ
Because it is a double-rod cylinder, the force is identical in both directions. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa for both extend and retract strokes.
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated variant of the SAID100X700. It is mechanically identical to the standard SAID100X700 double-rod ISO 15552 cylinder, with no changes to bore, force, or port size.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X700
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.