Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X75
The AirTAC B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 75mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ100 mm
- Stroke75 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X75
The AirTAC B06-SAID100X75 is a double-acting, double-rod ISO 15552 profile cylinder. The B06- prefix designates this as a battery-manufacturing dedicated variant, mechanically identical to the standard SAID100X75. Because the piston rod exits both end covers, the annulus area is equal on both sides, yielding a consistent 3681 N of force in both extend and retract directions at 0.5 MPa.
This through-rod design allows you to mount a primary workpiece on the front rod and a position flag or cam on the rear rod for external sensing. The extruded aluminum barrel features sensor grooves on both sides for flexible switch placement, and the carbon steel rod handles high side loads with a robust M20x1.5 thread.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X75 Technical Specifications
| Model | Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X75 Is Used
Battery Cell Stacking
Provides equal push and pull force to precisely stack battery cells without rotational drift, ensuring perfect alignment in module assembly.
Dual-Station Transfer
Drives two synchronized tooling plates from a single cylinder, using both rod ends to move battery packs simultaneously across a conveyor.
Anti-Rotation Guiding
The twin-rod architecture resists torsional side loads during tab welding or handling, keeping the end effector perfectly straight.
Is the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X75 the Right Cylinder?
Choose this 100 mm bore when your battery stacking or module handling process requires symmetric force and anti-rotation guidance. It provides 3681 N each way at 0.5 MPa; step down to an 80 mm bore if you only need 2268 N, or up to a 125 mm bore for 5734 N. Unlike a single-rod SAI, this double-rod configuration prevents the load from twisting during transit.
This cylinder uses a PT port (G1/2) and supports mounting accessories Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that the adjustable air cushions only decelerate the piston near stroke end; if your battery line must hold a vertical load without live air pressure, add an external rod lock or use a BSAID clamp-lock cylinder. It is dimensionally interchangeable per ISO 15552.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X75 FAQ
The B06- prefix indicates this is AirTAC's battery-manufacturing dedicated line. Mechanically, it is identical to the standard SAID100X75 double-rod cylinder, offering the same 3681 N force both ways at 0.5 MPa and G1/2 ports.
Because the rod occupies both sides of the piston, the extend and retract forces are equal. It outputs 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa in both directions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.