
The AirTAC B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID40X500 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 500mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC B06-SAID40X500 is a double-acting, double-rod ISO 15552 profile cylinder. The "B06-" prefix designates this as AirTAC's battery-manufacturing dedicated variant of the SAID40X500, built mechanically identical to the standard model for cell and module assembly lines. Because the piston rod exits both end covers, the annulus area is balanced, yielding exactly 528N of force in both extend and retract directions at 0.5 MPa.
This through-rod design allows you to mount a workpiece on the front rod end and a position flag or cam on the rear. The extruded aluminum barrel features sensor grooves on both sides, and with a 500mm stroke, the 16mm carbon steel rod requires external guidance to prevent bearing bending under side loads.
| Model | Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID40X500 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives symmetric, anti-rotation platens for stacking battery cells, utilizing the equal both-way force to maintain consistent pressure during extend and retract cycles.
Actuates two mechanisms simultaneously or uses the rear rod end to trigger a CMSE reed or DMSE electronic sensor, ensuring precise timing in module assembly lines.
Presents battery tabs for welding with high lateral stability; the twin-rod architecture resists torsional twist better than a single-rod SAI cylinder.
Choose this 40mm bore when a process demands equal push and pull forces—739N each way at 0.7 MPa—such as symmetric transfer or anti-rotation slides in battery pack handling. If your application needs less force, the 32mm bore provides 345N both ways; stepping up to the 50mm bore yields 825N. Remember that a plain SAID does not hold position unpowered; for vertical battery stacking that must resist drift on air loss, select a BSAID clamp-lock or external rod lock.
This model is dimensionally interchangeable per ISO 15552. It uses a PT G1/4 port, M12x1.25 rod thread, and supports mounting accessories Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, CR). At 500mm stroke, always use an external guide to support the load.
Quick checklist
Because it is a double-rod cylinder, the force is identical in both directions. It outputs 528N at 0.5 MPa, 739N at 0.7 MPa, and 950N at 0.9 MPa for both extend and retract strokes.
The B06- prefix marks this as AirTAC's battery-manufacturing dedicated variant of the SAID40X500. It shares the exact same physical specs, ISO 15552 dimensions, and double-rod mechanics as the base model, simply denoting its intended industry use.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.