Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID63X80
The AirTAC B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID63X80 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 80mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke80 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID63X80
The AirTAC B06-SAID63X80 is a double-acting, double-rod ISO 15552 profile cylinder. The leading "B06-" prefix designates this as AirTAC's battery-manufacturing dedicated variant, mechanically identical to the standard SAID63X80. Because a rod exits both ends, the annulus area is symmetrical, yielding exactly 1402 N of force in both extend and retract directions at 0.5 MPa.
This twin-rod architecture is ideal for battery cell stacking and module handling where anti-rotation guidance is critical. You can mount the end-effector on the front rod and a position flag for CMSE / DMSE sensors on the rear. It features a G3/8 port, M16x1.5 rod thread, and adjustable air cushions at both ends to decelerate loads smoothly.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID63X80 Technical Specifications
| Model | Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID63X80 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID63X80
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID63X80 Is Used
Battery Cell Stacking
Provides equal force and anti-rotation stability for aligning and stacking battery cells precisely during module assembly.
Symmetric-Force Transfer
Moves battery tabs or separators between stations with identical push and pull speeds for synchronized production line timing.
Dual-Side Actuation
Drives a front-end clamping tool while the rear rod operates a cam or position flag for DMSE electronic sensors.
Is the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID63X80 the Right Cylinder?
Choose this 63 mm bore when a battery assembly process requires matched push and pull forces—delivering 1402 N each way at 0.5 MPa. If your tabbing or handling station needs less force, step down to the 50 mm bore (825 N both ways); if you need more clamping power for pack assembly, step up to the 80 mm bore (2268 N). Unlike a single-rod SAI cylinder, this double-rod design prevents rotational drift and supports dual-side mechanisms.
For direct replacements, verify the 80 mm stroke, G3/8 PT port, and ISO 15552 mounting dimensions. Available accessories include Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts (omitting FB, CA, CB, CR). Note that a plain SAID does not hold position if air pressure drops; for battery lines requiring fail-safe holding, consider an external rod lock or the BSAID clamp-lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID63X80 FAQ
Because it is a double-rod cylinder, the force is identical in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa for both extend and retract strokes.
The B06- prefix indicates this is AirTAC's battery-manufacturing dedicated variant of the SAID63X80. It is mechanically identical to the standard model, featuring the same ISO 15552 dimensions, G3/8 port, and double-rod configuration, but is designated for battery industry applications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID63X80
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.