Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X100
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC100X100 is a genuine double-acting standard air cylinder with a Ø100mm bore and 100mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke100 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X100
The B06-SC100X100 is a double-acting tie-rod pneumatic cylinder engineered for battery-manufacturing lines. The B06- prefix marks this as a battery-industry dedicated variant of the standard SC100X100; mechanically, it delivers the exact same performance, delivering 3927 N of push force at 0.5 MPa and utilizing a 25 mm piston rod.
With a 100 mm stroke and a 188 mm body length A, this unit provides a total extended length of 288 mm. It features adjustable cushions (29 mm) to decelerate the piston smoothly at stroke ends, making it ideal for the high-cycle demands of cell stacking and module handling.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X100 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X100 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X100
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X100 Is Used
Battery Cell Stacking
Provides the consistent 3927 N push force at 0.5 MPa required to press and align lithium-ion cells tightly into module casings without damaging the cells.
Module Handling
Drives heavy-duty lifting and positioning mechanisms for battery modules on automated assembly conveyors, utilizing its 25 mm rod for structural stability.
Pack Indexing
Indexes battery packs along the production line, using adjustable 29 mm cushions to ensure smooth deceleration and prevent shock loads during transfer.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X100 the Right Cylinder?
This 100 mm bore size is optimal when you need substantial thrust for heavy pack handling but want to avoid the physical bulk of a 125 mm bore (which provides 6136 N at 0.5 MPa). If your battery line requires less force, stepping down to an 80 mm bore yields 2513 N at 0.5 MPa. To replace this cylinder, match the 100 mm bore, 100 mm stroke, PT1/2 port thread, basic mounting, and confirm if a built-in magnet is needed.
At a 100 mm stroke, the side-load risk is moderate, but always ensure the load is axially aligned to prevent premature rod-bearing wear. For offset loads in battery handling, consider a guided cylinder or external linear rails.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X100 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the standard AirTAC SC100X100 cylinder. It is mechanically identical to the base model, offering the same 100 mm bore, 100 mm stroke, and 3927 N push force at 0.5 MPa.
No, the SC series is a double-acting air cylinder and cannot hold a load or position without live air pressure. The adjustable cushion only decelerates the piston at the end of the stroke; a mechanical lock or external brake is required to hold a load safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.