Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X1000
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC100X1000 is a genuine double-acting standard air cylinder with a Ø100mm bore and 1000mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke1000 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X1000
The B06-SC100X1000 is AirTAC's battery-manufacturing dedicated variant of the standard SC100X1000 tie-rod cylinder. The B06- prefix designates its use in cell, module, and pack assembly lines without altering the physical specs. It is a double-acting pneumatic actuator delivering 3927 N of push force at 0.5 MPa.
Featuring a 100 mm bore and a 1000 mm stroke, this unit relies on a 25 mm piston rod and PT1/2 ports. It includes adjustable cushions measuring 29 mm to decelerate the piston near the end caps. The standard TPU seals support an operating temperature range of -20 to +70 C.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X1000 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X1000 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X1000
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X1000 Is Used
Cell Stacking Press
Provides the high force and long travel needed to press and align battery cell layers during automated stacking processes.
Module Handling
Transfers heavy battery modules across assembly stations, utilizing the full 1000 mm stroke to bridge equipment gaps.
Pack Positioning
Indexs large battery packs into testing or welding fixtures where a 3927 N push force at 0.5 MPa is required for secure placement.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X1000 the Right Cylinder?
This 100 mm bore generates 3927 N push force at 0.5 MPa; if your battery handling line requires less force, stepping down to an 80 mm bore yields 2513 N. Conversely, heavier pack manipulation might need a 125 mm bore providing 6136 N. Because this model features a 1000 mm stroke, the extended 25 mm rod is highly susceptible to bending under side loads.
For long-stroke applications like vertical electrode stacking or z-axis handling, always use an external guide rail or a guided cylinder to prevent rod-bearing damage. When sourcing a replacement, match these five points exactly: 100 mm bore, 1000 mm stroke, PT1/2 port thread, basic mounting, and no built-in magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X1000 FAQ
The B06- prefix indicates this cylinder is part of AirTAC's battery-manufacturing dedicated line. The B06-SC100X1000 is mechanically identical to the standard SC100X1000, featuring the same 100 mm bore, 1000 mm stroke, and 3927 N push force at 0.5 MPa.
No, the SC series is a basic tie-rod cylinder. With a 1000 mm stroke, the 25 mm rod is vulnerable to bending under side loads. You must use an external linear guide or a guided cylinder to handle any lateral forces.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X1000
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.