Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X100S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC100X100S is a genuine double-acting standard air cylinder with a Ø100mm bore and 100mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke100 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X100S
The B06-SC100X100S is a double-acting tie-rod pneumatic cylinder engineered for battery-manufacturing environments. The B06- prefix designates this as AirTAC's battery-manufacturing dedicated variant of the SC100X100S, meaning it is mechanically identical to the standard model but tailored for cell, module, and pack assembly lines. It delivers a robust 3927 N push force at 0.5 MPa, scaling up to 7068 N at 0.9 MPa.
This unit features a 100 mm bore, a 100 mm stroke, and a 25 mm piston rod. The built-in magnet (indicated by the S suffix) allows CMSG, DMSG, or EMSG sensors to clamp directly onto the barrel for precise position detection. With a body length A of 188 mm, the total extended length is 288 mm. Adjustable cushions at both ends provide 29 mm of deceleration to soften end-of-stroke impact.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X100S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X100S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X100S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X100S Is Used
Cell Stacking Presses
Provides the consistent 3927 N push force at 0.5 MPa needed to align and compress battery cells during automated stacking processes.
Module Tabbing
The 100 mm stroke and integrated magnet offer precise positional feedback for extending and retracting welding heads during busbar tabbing.
Pack Handling
Drives heavy-duty lifting and positioning mechanisms on conveyor lines, moving completed battery packs between assembly stations.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X100S the Right Cylinder?
This 100 mm bore size is optimal when 63 mm (1559 N at 0.5 MPa) lacks the thrust for heavy pack handling, but you want to avoid the bulk of a 125 mm cylinder (6136 N at 0.5 MPa). The 100 mm stroke provides ample travel for tabbing, stacking, or pressing operations. Because this is a tie-rod cylinder, it is shorter than an ISO 15552 unit and is not dimensionally interchangeable with that profile.
When ordering a replacement, match these five attributes exactly: 100 mm bore, 100 mm stroke, PT port thread, basic mounting (no bracket), and the built-in magnet (-S). Even at 100 mm stroke, minimize side loads on the 25 mm rod to prevent premature bearing wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X100S FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the SC100X100S. It is mechanically identical to the standard SC100X100S, featuring the same 100 mm bore, 100 mm stroke, 25 mm rod, and PT ports, but is designated for battery assembly applications.
At 0.5 MPa operating pressure, it provides 3927 N of push force and 3681 N of pull force. At its maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.