Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X150S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC100X150S is a genuine double-acting standard air cylinder with a Ø100mm bore and 150mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke150 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X150S
The B06-SC100X150S is an AirTAC double-acting tie-rod cylinder engineered for battery manufacturing lines. The B06- prefix designates this as a battery-industry dedicated variant of the standard SC100X150S, meaning it shares the exact same physical specs, including a 100mm bore, 150mm stroke, and a 25mm piston rod.
Operating at 0.5 MPa, it delivers 3927 N of push force, scaling up to 7068 N at 0.9 MPa. The built-in S suffix magnet allows CMSG or DMSG sensors to track piston position along the 188 mm body length, essential for automated cell stacking and handling.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X150S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X150S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X150S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X150S Is Used
Cell Stacking Press
Provides the 7068N clamping force at 0.9MPa needed to hold prismatic battery cells tightly during ultrasonic welding or adhesive curing.
Module Handling
Extends 150mm to push heavy battery modules onto transfer conveyors, using the magnetic piston for precise position confirmation.
Tab Welding Clamp
Actuates tooling to secure battery tabs during laser welding, relying on adjustable end cushions to prevent impact damage to delicate cell components.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X150S the Right Cylinder?
This 100mm bore provides substantial thrust for heavy pack manipulation. If your battery assembly process requires less force, dropping to an 80mm bore yields 2513 N at 0.5 MPa, while stepping up to 125mm offers 6136 N at 0.5 MPa. The 150mm stroke falls well within the 1500mm maximum standard stroke for this bore.
For a direct replacement, match the 100mm bore, 150mm stroke, PT1/2 port thread, basic mounting, and the -S magnet option. Because the stroke is under 300mm, side-load stress on the 25mm rod bearing is minimal, but always verify rod alignment to prevent premature seal wear in high-speed tabbing or handling operations.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X150S FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC100X150S, featuring the same 100mm bore, 150mm stroke, PT1/2 port, and built-in magnet, but is designated for battery cell, module, and pack assembly lines.
At a 0.5 MPa operating pressure, this double-acting cylinder provides 3927 N of push force and 3681 N of pull force. At its maximum 0.9 MPa operating pressure, the push force increases to 7068 N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X150S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.