Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X175
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC100X175 is a genuine double-acting standard air cylinder with a Ø100mm bore and 175mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke175 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X175
The B06-SC100X175 is AirTAC's battery-manufacturing dedicated variant of the standard SC100X175 tie-rod cylinder. The B06- prefix designates its optimization for cell, module, and pack assembly lines, though mechanically it retains the exact same double-acting air profile. With a 100mm bore, it provides a robust push force of 3927 N and a pull force of 3681 N at 0.5 MPa.
This 175mm stroke unit features a 25mm piston rod, PT1/2 porting, and 29mm adjustable cushions to tame end-of-stroke impacts. The body length A is 188mm, yielding a total extended length of approximately 363mm. It operates reliably between -20 and +70 C using standard TPU seals.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X175 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X175 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X175
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X175 Is Used
Battery Cell Stacking
Provides the high push force needed to align and compress prismatic battery cells tightly during module stacking processes.
Pack Assembly Conveyance
Drives heavy pallets or indexing mechanisms along battery pack assembly lines with precise 175mm stroke movements.
Tab Welding Clamps
Actuates robust clamping arms to hold battery busbars and tabs firmly in place during automated laser welding.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X175 the Right Cylinder?
Select this 100mm bore when a smaller 80mm cylinder (delivering 2513 N push at 0.5 MPa) lacks the thrust for heavier battery handling fixtures, but before stepping up to the massive 125mm class (6136 N). When replacing an existing unit, verify a 5-point match: 100mm bore, 175mm stroke, PT1/2 port thread, basic mounting, and no magnet.
At 175mm stroke, side-load management is necessary. Long unsupported rods bend under lateral stress; use external guide rails or a guided cylinder to prevent rod-bearing wear and premature seal failure in battery stacking operations.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X175 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated cylinder. It is mechanically identical to the standard AirTAC SC100X175, featuring the same 100mm bore, 175mm stroke, and 3927 N push force at 0.5 MPa.
No, the SC series is double-acting and does not lock or hold position without live air pressure. The adjustable cushion only decelerates the piston near stroke ends. For vertical battery handling, you must use an external mechanical lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X175
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.