Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X200
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC100X200 is a genuine double-acting standard air cylinder with a Ø100mm bore and 200mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke200 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X200
The B06-SC100X200 is a battery-manufacturing dedicated variant of the AirTAC SC100X200 double-acting pneumatic cylinder. The B06- prefix designates its use in cell, module, and pack assembly lines, but mechanically it is identical to the standard SC100X200. It features a 100mm bore and a 200mm stroke.
This tie-rod cylinder delivers 3927 N of push force at 0.5 MPa and reaches 7068 N at its 0.9 MPa maximum operating pressure. It uses a 25mm piston rod, a PT1/2 port, and has an adjustable cushion length of 29mm to decelerate the piston near the end caps.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X200 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X200 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X200
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X200 Is Used
Battery Module Handling
Drives heavy battery module lifting and positioning stations during automated pack assembly.
Cell Stacking Press
Applies consistent 3927 N force at 0.5 MPa for stacking prismatic cells in formation lines.
Tab Welding Clamp
Actuates robust clamping arms to hold battery tabs securely during ultrasonic welding.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X200 the Right Cylinder?
This 100mm bore provides substantial thrust for heavy battery handling. If your assembly fixture requires less force, stepping down to an 80mm bore yields 2513 N at 0.5 MPa. For higher force demands, a 125mm bore offers 6136 N at 0.5 MPa.
When replacing this unit, match these five attributes: 100mm bore, 200mm stroke, PT1/2 port thread, basic mounting, and no magnet. Because the 200mm stroke is relatively short for this bore, side-load risks are minimal, but always ensure axial load alignment to prevent premature rod bearing wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X200 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC100X200, offering the same 100mm bore, 200mm stroke, and force ratings.
At 0.5 MPa it provides 3927 N of push force. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.