Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X200S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC100X200S is a genuine double-acting standard air cylinder with a Ø100mm bore and 200mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke200 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X200S
The B06-SC100X200S is an AirTAC double-acting tie-rod cylinder built for battery-manufacturing lines. The B06- prefix designates this as a battery-industry dedicated variant of the SC100X200S, meaning it is mechanically identical to the standard model but tailored for cell, module, and pack assembly applications.
Delivering a robust 5497 N of push force at 0.7 MPa, this 100 mm bore unit is engineered for heavy-duty handling. It features a 25 mm piston rod, 29 mm adjustable cushions, and a 188 mm body length A. The built-in S suffix magnet allows CMSG/DMSG/EMSG sensors to track piston position along the 200 mm stroke.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X200S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X200S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X200S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X200S Is Used
Battery Cell Stacking
Provides the high thrust and precise position feedback needed for aligning and stacking prismatic battery cells during module assembly.
Pack Handling and Pressing
Drives heavy-duty material handling and pressing operations within battery pack production lines, ensuring reliable actuation under consistent pressure.
Tab Welding Fixtures
Actuates clamping fixtures for battery tab welding, using its magnetic piston to confirm clamp closure before the welding process begins.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X200S the Right Cylinder?
This 100 mm bore provides 3927 N push force at 0.5 MPa. If your battery-stacking or handling fixture requires less force, stepping down to an 80 mm bore yields 2513 N at 0.5 MPa. For higher pressing demands, a 125 mm bore offers 6136 N at 0.5 MPa.
When ordering a replacement, match these five points exactly: 100 mm bore, 200 mm stroke, PT port thread, basic mounting, and the built-in magnet (S). For a 200 mm stroke on a 25 mm rod, side loads are moderate, but always ensure axial load alignment to prevent premature rod-bearing wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X200S FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the SC100X200S. It is mechanically identical to the standard SC100X200S cylinder, offering the same 100 mm bore, 200 mm stroke, 5497 N push force at 0.7 MPa, and built-in magnet, but is designated for battery industry applications.
No. The adjustable cushion only decelerates the piston near the end of the stroke to soften impact. It does not lock or hold the cylinder's position. If your application requires position holding without live air pressure, you must use an external mechanical lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.