Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X225
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC100X225 is a genuine double-acting standard air cylinder with a Ø100mm bore and 225mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke225 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X225
The B06-SC100X225 is a battery-manufacturing dedicated variant of the AirTAC SC100X225 double-acting pneumatic cylinder, mechanically identical to the standard model. It features a 100mm bore and a 225mm stroke, generating a push force of 3927 N at 0.5 MPa and reaching 7068 N at 0.9 MPa. The 225mm stroke is a non-standard, made-to-order length for this bore.
Designed for cell, module, and pack assembly lines, this tie-rod cylinder includes a 25mm piston rod, a PT1/2 port, and 29mm adjustable cushions. The B06- prefix simply designates its application suitability for battery production equipment without altering any physical specifications.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X225 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X225 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X225
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X225 Is Used
Battery Cell Stacking
Provides the high push force needed to align and stack prismatic battery cells tightly during module assembly.
Pack Handling
Moves heavy battery packs along conveyor lines, utilizing the 225mm stroke to push units into testing stations.
Tab Welding Press
Applies consistent clamping pressure for busbar and tab welding operations in automated battery production.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X225 the Right Cylinder?
This 100mm bore provides 3927 N push force at 0.5 MPa; if your battery handling line needs less force, stepping down to an 80mm bore yields 2513 N, while moving up to a 125mm bore offers 6136 N. Because the 225mm stroke exceeds standard increments, expect a made-to-order lead time.
For a 225mm stroke, side-load bending on the 25mm rod is a factor—use external guides or a guided cylinder to prevent premature rod-bearing wear. When replacing this unit, match 5 points: 100mm bore, 225mm stroke, PT1/2 port thread, basic mounting, and no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X225 FAQ
The B06- prefix indicates this cylinder is part of AirTAC's battery-manufacturing dedicated line. It is mechanically identical to the standard SC100X225, offering the same 100mm bore, 225mm stroke, and 7068 N thrust at 0.9 MPa.
No, 225mm is a non-standard stroke for the SC100 bore (standard strokes jump from 200mm to 250mm). It is manufactured as a made-to-order item, so confirm lead times when requesting a quote.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X225
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.