Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X25S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC100X25S is a genuine double-acting standard air cylinder with a Ø100mm bore and 25mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke25 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X25S
The B06-SC100X25S is a battery-manufacturing dedicated double-acting tie-rod cylinder. The B06- prefix marks it for battery production lines (cell stacking, module handling), making it mechanically identical to the standard AirTAC SC100X25S. It delivers a robust 3927 N push force at 0.5 MPa and features a short 25 mm stroke for rapid, high-force clamping.
Equipped with a built-in magnet (S suffix), this unit supports CMSG/DMSG/EMSG sensors for position feedback. It uses a 25 mm rod, PT1/2 port, and offers 29 mm adjustable cushions to soften end-of-stroke impacts. The compact body length A is 188 mm, yielding a total extended length of 213 mm.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X25S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X25S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X25S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X25S Is Used
Cell Stacking Press
Provides the high 3927 N push force needed to align and compress prismatic battery cells tightly during automated stacking processes.
Module Tab Welding
Uses its short 25 mm stroke and built-in magnet for precise, rapid positioning of busbars prior to laser welding on battery modules.
Pack Handling Stopper
Acts as a high-force stopper or diverter on conveyor lines, with sensor feedback to confirm retraction before battery packs advance.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X25S the Right Cylinder?
This 100 mm bore provides 3927 N at 0.5 MPa; step down to an 80 mm bore if your application only requires 2513 N, or up to 125 mm for 6136 N. The short 25 mm stroke minimizes rod-bearing bending, making it highly rigid for direct compression tasks. Because this is a tie-rod design, it is shorter than ISO 15552 cylinders and should only be replaced by another AirTAC SC100 cylinder matching the PT port, basic mount, and magnet.
For battery line integration, ensure your directional valve provides adequate flow for the PT1/2 port. The cylinder does not hold position without live air pressure; if a fixture must maintain clamp force during an air loss, add an external mechanical lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X25S FAQ
At 0.5 MPa operating pressure, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N.
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the SC100X25S. It is mechanically identical to the standard SC100X25S, featuring the same 100 mm bore, 25 mm stroke, PT1/2 port, and built-in magnet, but is designated for battery assembly lines.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X25S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.