Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X400
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC100X400 is a genuine double-acting standard air cylinder with a Ø100mm bore and 400mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke400 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X400
The B06-SC100X400 is an AirTAC battery-manufacturing dedicated pneumatic cylinder, mechanically identical to the standard SC100X400. The B06- prefix simply designates its optimized logistics for battery production lines, retaining the exact same 100mm bore and 400mm stroke. As a double-acting tie-rod cylinder, it generates 5497N of push force at 0.7 MPa.
This model features a 25mm piston rod, PT1/2 porting, and 29mm adjustable cushions to decelerate the piston at stroke ends. With a body length A of 188mm, the total extended length reaches approximately 588mm. It operates efficiently on filtered air between 0.15 and 1.0 MPa, making it a robust choice for heavy-duty handling.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X400 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X400 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X400
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X400 Is Used
Battery Module Handling
Drives the heavy positioning and transfer of battery modules during automated pack assembly lines.
Cell Stacking Press
Provides the consistent 3927N push force at 0.5 MPa required for stacking prismatic cells in formation presses.
Tab Welding Indexing
Actuates 400mm indexing strokes to move battery packs precisely into tab welding stations.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X400 the Right Cylinder?
Stepping down to an 80mm bore reduces the 0.5 MPa push force to 2513N, whereas moving up to a 125mm bore increases it to 6136N. Choose this 100mm bore when your application demands roughly 3927N at 0.5 MPa. For this 400mm stroke, the 25mm rod is susceptible to bending under side loads; use an external guide rail or a guided cylinder to prevent rod-bearing damage.
When ordering a replacement, match these five attributes exactly: 100mm bore, 400mm stroke, PT1/2 port thread, basic mounting style, and no built-in magnet. Note that the SC series is a tie-rod cylinder and is dimensionally shorter than ISO 15552 profiles, so it will not drop into an ISO 15552 footprint.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X400 FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated variant of the SC100X400. It is mechanically identical to the standard SC100X400, offering the same 100mm bore, 400mm stroke, and 5497N push force at 0.7 MPa, with no changes to physical dimensions or seals.
No, this is a double-acting cylinder and cannot hold a load without live air pressure. The adjustable cushions only decelerate the piston near the stroke ends to soften impact; they do not act as a brake. A mechanical lock or external pilot-operated check valve is required to hold vertical loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X400
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.