Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X450S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC100X450S is a genuine double-acting standard air cylinder with a Ø100mm bore and 450mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke450 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X450S
The B06-SC100X450S is an AirTAC double-acting tie-rod pneumatic cylinder engineered for battery manufacturing environments. The "B06-" prefix designates this as a battery-industry dedicated variant of the standard SC100X450S, meaning it is mechanically identical to the base model with a 100mm bore and 450mm stroke. It generates a push force of 3927 N and a pull force of 3681 N at 0.5 MPa.
This unit includes a built-in magnet for position sensing and uses standard PT1/2 ports. The 25mm piston rod operates within an adjustable cushion length of 29mm to absorb impact at stroke ends. With a body length A of 188mm, the total extended length reaches 638mm, making it well-suited for substantial linear actuation tasks on cell module assembly lines.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X450S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X450S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X450S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X450S Is Used
Cell Module Stacking
Provides the high force and 450mm travel needed to press and align battery cell modules into packs during automated assembly.
Tab Welding Press
Delivers consistent 3927 N clamping pressure at 0.5 MPa to hold battery tabs firmly in place during ultrasonic welding processes.
Pack Handling
Actuates heavy duty pushers and diverters on conveyor lines, using the built-in magnet to confirm full extension and retraction.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X450S the Right Cylinder?
This 100mm bore provides 3927 N of push force at 0.5 MPa. If your battery handling system requires less force, stepping down to an 80mm bore yields 2513 N, while moving up to a 125mm bore provides 6136 N. The built-in magnet allows CMSG, DMSG, or EMSG sensors to track piston position during stacking or tabbing operations.
At a 450mm stroke, the 25mm rod experiences increased leverage from side loads. To prevent rod-bearing bending and premature wear, use an external guide rail or a guided cylinder module. When replacing this unit, match the 100mm bore, 450mm stroke, PT1/2 port thread, basic mounting style, and the -S magnet option to ensure proper fit and sensor function.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X450S FAQ
The B06- prefix indicates this cylinder is part of AirTAC's battery-manufacturing dedicated line. It is mechanically identical to the standard SC100X450S, featuring the same 100mm bore, 450mm stroke, and 3927 N push force at 0.5 MPa, with no changes to physical specifications.
The cylinder operates at pressures up to 1.0 MPa. At the maximum operating pressure of 0.9 MPa, it generates a push force of 7068 N and a pull force of 6626 N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X450S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.