Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X50
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC100X50 is a genuine double-acting standard air cylinder with a Ø100mm bore and 50mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke50 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X50
The B06-SC100X50 is an AirTAC battery-manufacturing dedicated pneumatic cylinder. The B06- prefix designates it for cell, module, and pack assembly lines, though mechanically it is identical to the standard SC100X50. This double-acting tie-rod cylinder provides a robust 3927 N of push force at 0.5 MPa, utilizing a 25 mm piston rod and a PT1/2 port.
With a compact 50 mm stroke, this unit is built for short, high-force movements. It features an adjustable cushion length of 29 mm to decelerate the piston smoothly at stroke ends, and the body length A measures 188 mm. It operates reliably on filtered air between 0.15 and 1.0 MPa.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X50 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X50 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X50
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X50 Is Used
Cell Stacking Press
Provides the consistent 3927 N push force at 0.5 MPa needed to compress and align prismatic battery cells during automated stacking processes.
Module Handling
Actuates heavy-duty clamps and lifts for positioning battery modules on conveyors, utilizing the short 50 mm stroke for rapid cycling.
Pack Assembly
Drives robust joining or fastening stations in battery pack assembly lines where high force and rigidity are required.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X50 the Right Cylinder?
This 100 mm bore is ideal when you need substantial thrust for pressing or holding battery components. If your assembly process requires less force, stepping down to an 80 mm bore yields 2513 N at 0.5 MPa. For even heavier pack manipulation, a 125 mm bore provides 6136 N. Since the stroke is a short 50 mm, side-load stress on the rod bearing is minimal compared to longer strokes.
When specifying a replacement, match these five points: the 100 mm bore, 50 mm stroke, PT1/2 port thread, basic mounting style, and absence of a magnet. The SC is a tie-rod design and is shorter than ISO 15552 cylinders, so it is not a direct dimensional substitute for them.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X50 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the standard SC100X50. It is mechanically identical to the base model, offering the same 100 mm bore, 50 mm stroke, and 3927 N push force at 0.5 MPa, but is designated for battery industry applications.
No, the SC double-acting cylinder does not hold position or lock when air pressure is lost or exhausted. The adjustable cushion only decelerates the piston at the end of the stroke. If your battery assembly process requires position holding without live pressure, you must use an external mechanical lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.