Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X500
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC100X500 is a genuine double-acting standard air cylinder with a Ø100mm bore and 500mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke500 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X500
The B06-SC100X500 is an AirTAC double-acting tie-rod pneumatic cylinder engineered for battery manufacturing environments. The B06- prefix designates this as a battery-industry dedicated variant of the standard SC100X500, meaning it is mechanically identical to the base model with a 100mm bore and 500mm stroke. It provides a robust push force of 3927N at 0.5MPa and up to 7068N at 0.9MPa.
This unit features a 25mm piston rod, a PT1/2 port, and adjustable cushions measuring 29mm to decelerate the payload smoothly at stroke ends. With a standard body length A of 188mm, the total extended length reaches 688mm. It is a genuine AirTAC component built for demanding cell and pack assembly lines.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X500 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X500 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X500
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X500 Is Used
Battery Module Handling
Drives heavy lifting and positioning mechanisms for battery module transfers on high-throughput assembly lines.
Cell Stacking Press
Applies consistent 3927N clamping force at 0.5MPa for prismatic cell stacking and alignment operations.
Pack Indexing
Actuates large payload indexing gates and diverters to route battery packs through testing stations.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X500 the Right Cylinder?
This 100mm bore is ideal when you need substantial thrust—stepping down to an 80mm bore drops the 0.5MPa push force to 2513N, while a 125mm bore increases it to 6136N. For a 500mm stroke, the 25mm rod is unsupported for a significant distance; external guides or a guided cylinder are strongly recommended to prevent rod-bearing bending under side loads.
When specifying a replacement, match these five points exactly: 100mm bore, 500mm stroke, PT1/2 port thread, basic mounting (no bracket), and no built-in magnet. This SC tie-rod cylinder is shorter than ISO 15552 profile cylinders and is not dimensionally interchangeable with them.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X500 FAQ
The B06- prefix indicates this cylinder is part of AirTAC's battery-manufacturing dedicated line. The B06-SC100X500 is mechanically identical to the standard SC100X500, offering the same 100mm bore, 500mm stroke, and 3927N push force at 0.5MPa.
No, the SC cylinder does not hold its position when air pressure is lost or exhausted. The adjustable cushion only decelerates the piston near the stroke end; a mechanical lock, external rod brake, or pilot-operated check valve is required to hold vertical loads safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X500
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.