Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X50S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC100X50S is a genuine double-acting standard air cylinder with a Ø100mm bore and 50mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke50 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X50S
The B06-SC100X50S is an AirTAC double-acting tie-rod pneumatic cylinder engineered for battery-manufacturing lines. The B06- prefix marks it as a battery-dedicated variant of the SC100X50S, meaning it is mechanically identical to the standard model but designated for cell, module, and pack assembly operations. It features a 100mm bore and a 50mm stroke.
Delivering a robust push force of 3927 N at 0.5 MPa and up to 7068 N at 0.9 MPa, this cylinder easily drives heavy clamping and stacking tasks. The built-in S suffix magnet allows CMSG/DMSG/EMSG sensors to mount directly on the 188 mm body for precise end-of-stroke detection. It uses a 25 mm piston rod and PT1/2 ports.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X50S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X50S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X50S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X50S Is Used
Battery Cell Stacking
Provides the high push force needed to press and align lithium-ion prismatic cells tightly during module stacking processes.
Busbar Clamping
Holds heavy copper busbars firmly in position for automated laser welding on battery pack assembly lines.
Pack Handling Divert
Actuates heavy-duty routing gates and lifting stops to manage battery module pallets on production conveyors.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X50S the Right Cylinder?
This 100mm bore provides massive thrust for heavy battery pack manipulation. If your assembly line requires less force, stepping down to an 80mm bore yields 2513 N at 0.5 MPa, whereas moving up to a 125mm bore offers 6136 N. Because this is a short 50mm stroke, side-load stress on the rod bearing is minimal compared to longer strokes.
When specifying a replacement, ensure an exact match across five points: 100mm bore, 50mm stroke, PT1/2 port thread, basic mounting style, and the built-in magnet (-S). Note that the SC is a tie-rod cylinder and is shorter than ISO 15552 formats, so it is not a direct dimensional substitute for ISO profiles.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X50S FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the SC100X50S. It is mechanically identical to the standard SC100X50S cylinder, offering the same 100mm bore, 50mm stroke, and 7068 N thrust at 0.9 MPa, but is designated for battery production environments.
At 0.5 MPa operating pressure, it provides a push force of 3927 N and a pull force of 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.