Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X700
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC100X700 is a genuine double-acting standard air cylinder with a Ø100mm bore and 700mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke700 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X700
The B06-SC100X700 is an AirTAC double-acting tie-rod pneumatic cylinder engineered for battery-manufacturing lines. The B06- prefix designates this as a battery-industry dedicated variant of the standard SC100X700; mechanically, it shares the exact same physical specifications. It features a 100mm bore and a 700mm stroke, providing a robust push force of 3927 N at 0.5 MPa and a maximum theoretical force of 801 kgf.
This model incorporates a 25mm piston rod and PT1/2 port threads. With a body length A of 188mm, the total extended length reaches 888mm. It uses standard TPU seals rated for -20 to +70 C, adjustable cushions measuring 29mm to decelerate the piston, and operates efficiently at speeds between 30-800 mm/s.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X700 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X700 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X700
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X700 Is Used
Battery Cell Stacking
Provides the high force and long stroke needed to press and align battery cells precisely into modules during automated assembly.
Pack Handling
Moves heavy battery packs along the production line, utilizing the 3927 N push force to shift loads between manufacturing stations.
Tab Welding Press
Applies consistent clamping pressure on battery tabs prior to laser welding, ensuring electrical contact and joint quality.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X700 the Right Cylinder?
This 100mm bore generates 3927 N of push force at 0.5 MPa. If your battery stacking or handling application requires less force, stepping down to an 80mm bore yields 2513 N. If you need higher clamping pressure for pack assembly, upgrading to a 125mm bore provides 6136 N. For exact replacements, match the 100mm bore, 700mm stroke, PT1/2 port, basic mounting, and non-magnet configuration.
Because this cylinder features a 700mm stroke, the extended 25mm rod is susceptible to bending under side loads. For battery cell handling and stacking mechanisms that generate lateral forces, use an external guide rail or a guided cylinder to prevent rod bearing wear and ensure precise alignment.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X700 FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC100X700, featuring the same 100mm bore, 700mm stroke, and force ratings, but is designated for battery cell, module, and pack assembly lines.
The SC cylinder does not hold position without air pressure and the adjustable cushion only decelerates the piston at stroke end. Because the 700mm stroke creates a long unsupported rod, you must use an external guide or a guided cylinder to support side loads and prevent bending.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X700
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.