Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X700S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC100X700S is a genuine double-acting standard air cylinder with a Ø100mm bore and 700mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke700 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X700S
The B06-SC100X700S is an AirTAC double-acting pneumatic cylinder engineered for battery manufacturing lines. The B06- prefix designates this as a battery-industry dedicated variant of the standard SC100X700S, meaning it shares the exact same mechanical architecture without any proprietary alterations. Delivering a robust 5497 N of push force at 0.7 MPa, it is built for heavy-duty cell handling and pack assembly tasks.
This 100mm bore unit features a 700mm stroke and a 25mm piston rod. The built-in S suffix magnet allows CMSG, DMSG, or EMSG sensors to clamp directly onto the barrel for precise end-of-stroke detection. With a body length A of 188mm and 29mm adjustable cushions at both ends, it decelerates heavy loads smoothly to minimize endcap impact.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X700S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X700S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X700S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X700S Is Used
Battery Cell Stacking
Provides the high force and long stroke needed to push battery cells into stacking fixtures with precision.
Module Transfer
Actuates large format battery modules along assembly conveyors, utilizing the built-in magnet for position feedback.
Pack Handling
Shifts heavy battery packs between manufacturing stations, relying on adjustable cushions to soften end-of-stroke impact.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X700S the Right Cylinder?
This 100mm bore provides 3927 N of push force at 0.5 MPa. If your battery stacking or handling fixture requires less force, stepping down to an 80mm bore yields 2513 N at 0.5 MPa, while moving up to a 125mm bore provides 6136 N for heavier pack manipulation. When replacing this unit, match the 100mm bore, 700mm stroke, PT1/2 port thread, and the built-in magnet.
Because this model features a 700mm stroke, the extended 25mm rod is susceptible to bending under side loads. For battery line applications involving heavy pallets or offset loads, use an external guide rail or a dedicated guided cylinder to prevent rod bearing wear and ensure smooth actuation.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X700S FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC100X700S, featuring the same 100mm bore, 700mm stroke, 25mm rod, and 5497 N push force at 0.7 MPa.
No, an unsupported 700mm stroke on a 25mm rod will bend under side load. You must use an external guide mechanism or a guided cylinder to support the load and prevent premature rod bearing failure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X700S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.