Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X75
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC100X75 is a genuine double-acting standard air cylinder with a Ø100mm bore and 75mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke75 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X75
The B06-SC100X75 is AirTAC's battery-manufacturing dedicated variant of the standard SC100X75 tie-rod cylinder. The B06- prefix designates its use in battery cell, module, and pack assembly lines, but mechanically it is identical to the base model, delivering 3927 N of push force at 0.5 MPa.
This double-acting pneumatic cylinder features a 100 mm bore, a 75 mm stroke, and a 25 mm piston rod. It includes adjustable cushions with a 29 mm length to decelerate the piston near the end caps, ensuring smooth operation during high-speed battery handling and stacking tasks.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X75 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X75 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X75
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X75 Is Used
Cell Stacking Press
Provides the consistent 3927 N push force at 0.5 MPa required for aligning and pressing battery cell layers during automated stacking processes.
Module Handling
Actuates lifting and positioning mechanisms for heavy battery modules on assembly conveyors, utilizing its 25 mm rod for robust load transfer.
Tab Welding Clamp
Delivers reliable clamping pressure for battery tab welding fixtures, with adjustable 29 mm cushions ensuring soft stop without damaging delicate cell components.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X75 the Right Cylinder?
This 100 mm bore provides substantial force (3927 N push at 0.5 MPa); if your battery stacking or handling mechanism requires less force, stepping down to an 80 mm bore yields 2513 N. If you need more power for heavy pack lifting, a 125 mm bore offers 6136 N.
When replacing this cylinder, match the 100 mm bore, 75 mm stroke, PT1/2 port thread, basic mounting, and non-magnet configuration exactly. Although 75 mm is a relatively short stroke, always ensure the load is guided to prevent side-load wear on the rod bearing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X75 FAQ
The B06- prefix indicates this is an AirTAC cylinder dedicated to battery-manufacturing applications. It is mechanically identical to the standard SC100X75, featuring the same 100 mm bore, 75 mm stroke, and 3927 N push force at 0.5 MPa, with no changes to physical specifications or seals.
No, the SC series is double-acting and does not lock or hold position without live air pressure. If an application must hold a load vertically or maintain position during pressure loss, an external mechanical lock, rod brake, or pilot-operated check valve must be used.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.