Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X75S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC100X75S is a genuine double-acting standard air cylinder with a Ø100mm bore and 75mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke75 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X75S
The B06-SC100X75S is an AirTAC double-acting tie-rod pneumatic cylinder engineered for battery-manufacturing environments. The "B06-" prefix designates this as a battery-industry dedicated variant of the standard SC100X75S, meaning it is mechanically identical to the base model. It features a 100mm bore and a 75mm stroke, driven by a 25mm piston rod.
Operating at 0.5 MPa, this cylinder generates a push force of 3927 N and a pull force of 3681 N, scaling up to 7068 N at 0.9 MPa. The built-in S suffix magnet allows CMSG, DMSG, or EMSG sensors to clamp directly onto the 188mm body for precise position detection during cell assembly. It uses standard PT1/2 ports and adjustable cushions measuring 29mm to decelerate the piston at stroke ends.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X75S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X75S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X75S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X75S Is Used
Battery Cell Stacking
Provides the high push force needed to press and align lithium-ion prismatic cells tightly during module stacking operations.
Tab Welding Clamp
Exerts consistent clamping pressure to hold battery tabs firmly in place for laser welding without damaging delicate foils.
Pack Handling Divert
Drives heavy-duty pusher mechanisms to route finished battery packs along assembly line conveyors.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X75S the Right Cylinder?
This 100mm bore provides substantial thrust for demanding pack assembly tasks. If your battery line requires less force, stepping down to an 80mm bore yields 2513 N at 0.5 MPa, whereas a 125mm bore increases output to 6136 N. Because the stroke is 75mm, side-load stress on the 25mm rod is minimal, but always verify rod-bearing alignment when mounting.
When replacing this unit, match five critical points: the 100mm bore, 75mm stroke, PT1/2 port thread, basic mounting style, and the built-in magnet (-S). Note that the SC is a tie-rod cylinder and is shorter than ISO 15552 formats, so it is not a direct dimensional replacement for ISO profiles.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X75S FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the SC100X75S. It is mechanically identical to the standard SC100X75S, featuring the same 100mm bore, 75mm stroke, and 3927 N push force at 0.5 MPa, but is designated for battery line applications.
No, this is a double-acting air cylinder and cannot hold a load or position without live air pressure. The adjustable cushion only decelerates the piston at the end of the stroke to soften impact; it does not act as a brake or locking mechanism.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.