Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X800
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC100X800 is a genuine double-acting standard air cylinder with a Ø100mm bore and 800mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke800 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X800
The B06-SC100X800 is a battery-manufacturing dedicated variant of the standard AirTAC SC100X800, featuring identical mechanical specifications. The B06- prefix simply designates its application focus for battery production lines. This double-acting tie-rod cylinder delivers 3927 N of push force at 0.5 MPa and up to 7068 N at 0.9 MPa.
With an 800 mm stroke and a 25 mm piston rod, it provides the long linear travel needed for cell stacking or module transfer. The body length A is 188 mm, giving an approximate extended length of 988 mm. It includes adjustable cushions (29 mm) to decelerate the payload smoothly at stroke ends.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X800 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X800 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X800
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X800 Is Used
Battery Cell Stacking
Provides the 800 mm extended reach and 7068 N force required to push battery cells into stacking fixtures during module assembly.
Pack Transfer Handling
Moves heavy battery packs between conveyor stations with smooth adjustable cushioning to protect delicate cell casings from end-of-stroke impact.
Tab Welding Positioning
Actuates heavy welding jigs along the 800 mm axis, ensuring precise alignment for battery tab welding operations.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X800 the Right Cylinder?
If your battery assembly process requires less force, stepping down to an 80 mm bore yields 2513 N at 0.5 MPa, whereas a 125 mm bore increases output to 6136 N for heavier pack manipulation. This 100 mm bore hits a strong middle ground for 800 mm travel.
Because this model features an 800 mm stroke, the unsupported 25 mm rod is susceptible to bending under side loads. For battery handling tasks that generate lateral forces, integrate an external guide rail or select a guided cylinder to prevent rod bearing wear. When ordering a replacement, match the 100 mm bore, 800 mm stroke, PT1/2 port thread, basic mounting, and non-magnet configuration exactly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X800 FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC100X800, offering the same 100 mm bore, 800 mm stroke, and 7068 N force at 0.9 MPa, but is designated for battery industry applications.
No, the SC series is double-acting and does not lock or hold position without live air pressure. The adjustable cushion only decelerates the piston near the stroke ends. To hold a load vertically or maintain position during pressure loss, you must use an external mechanical lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X800
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.