Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X800S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC100X800S is a genuine double-acting standard air cylinder with a Ø100mm bore and 800mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke800 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X800S
The B06-SC100X800S is a battery-manufacturing dedicated variant of the standard AirTAC SC100X800S double-acting pneumatic cylinder. The B06- prefix designates its application in battery production lines, though mechanically it shares the exact same physical specs as the base model. It features a 100mm bore and an 800mm stroke, driven by a 25mm piston rod.
Delivering a robust 5497N push force at 0.7 MPa and up to 7068N at 0.9 MPa, this tie-rod cylinder is built for heavy-duty handling. The S suffix indicates a built-in magnet for position sensing, while the adjustable cushion strokes measure 29mm to absorb end-of-travel impacts.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X800S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X800S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X800S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X800S Is Used
Battery Module Handling
Drives the heavy lifting and positioning of battery modules during automated pack assembly lines.
Cell Stacking Presses
Provides the consistent high force and 800mm reach needed for electrode stacking machinery.
Tabbing & Sorting
Actuates long-travel sorting gates and tab alignment mechanisms in cell manufacturing.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X800S the Right Cylinder?
This 100mm bore generates 5497N at 0.7 MPa; if your battery-handling fixture requires less force, stepping down to an 80mm bore yields 3518N. For heavier module lifting, a 125mm bore provides 8590N. To replace this cylinder, match the 100mm bore, 800mm stroke, PT1/2 port thread, basic mounting, and the S magnet option.
Because the 800mm stroke is substantial, the unsupported 25mm rod is susceptible to bending under side loads. For battery stacking or tabbing operations with off-center loads, use an external guide rail or a dedicated guided cylinder to prevent rod bearing wear and ensure precise alignment.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X800S FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC100X800S, featuring the same 100mm bore, 800mm stroke, and 7068N force at 0.9 MPa.
No, the SC series is double-acting and does not lock position upon loss of air pressure. If a battery module must be held safely without live pressure, an external mechanical lock or pilot-operated check valve is required.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X800S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.