Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X100
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC32X100 is a genuine double-acting standard air cylinder with a Ø32mm bore and 100mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke100 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X100
The B06-SC32X100 is an AirTAC double-acting tie-rod cylinder configured for battery manufacturing environments. The B06- prefix designates this as a battery-manufacturing dedicated variant of the standard SC32X100, meaning it is mechanically identical to the base model. It features a 32mm bore and a 100mm stroke.
Operating at 0.5 MPa, it provides a push force of 402 N and a pull force of 345 N, scaling up to 724 N of push force at the maximum 0.9 MPa operating pressure. The cylinder uses a 12mm piston rod, a PT1/8 port, and incorporates 21mm adjustable cushions to decelerate the piston at stroke ends.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X100 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X100 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X100
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X100 Is Used
Cell Stacking
Provides the precise 402 N push force at 0.5 MPa needed to align and press prismatic battery cells into modules during automated stacking processes.
Module Handling
Actuates sorting gates and pushers on conveyor lines, using its 100mm stroke to route battery modules to the correct testing station.
Tab Welding Clamp
Applies consistent clamping pressure to hold battery tabs in place during ultrasonic welding, ensuring accurate electrical connections.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X100 the Right Cylinder?
This 32mm bore is a solid fit when a 402 N push force at 0.5 MPa is sufficient for your battery stacking or handling task. If your assembly process requires more clamping power, stepping up to the 40mm bore increases the 0.5 MPa push force to 628 N. Conversely, if space is extremely tight, dropping to a smaller bore reduces the footprint.
When replacing this unit, match the 32mm bore, 100mm stroke, PT1/8 port thread, basic mounting style, and non-magnet configuration. Because this is a tie-rod cylinder, it is dimensionally shorter than an ISO 15552 profile and serves as a direct replacement only for another AirTAC SC32 cylinder with identical specifications.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X100 FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC32X100, offering the same 32mm bore, 100mm stroke, and 724 N maximum push force at 0.9 MPa, simply designated for battery industry applications.
No, this is a double-acting air cylinder and does not lock or hold position without live air pressure. The adjustable cushions only decelerate the piston near the stroke end. For vertical battery handling applications that require position holding, you must use an external mechanical lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.