Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X75
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC32X75 is a genuine double-acting standard air cylinder with a Ø32mm bore and 75mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke75 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X75
The AirTAC B06-SC32X75 is a double-acting tie-rod pneumatic cylinder engineered for battery manufacturing environments. The B06- prefix designates this as a battery-manufacturing dedicated variant, mechanically identical to the standard SC32X75. It delivers a push force of 402 N at 0.5 MPa, making it well-suited for compact handling and sorting tasks on cell assembly lines.
This 32 mm bore cylinder features a 75 mm stroke, a 12 mm piston rod, and a body length A of 140 mm. It uses a PT1/8 port thread and includes 21 mm adjustable cushions to decelerate the piston at stroke ends. Operating pressure ranges from 0.15 to 1.0 MPa, with a speed range of 30-800 mm/s.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X75 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X75 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X75
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X75 Is Used
Cell Stacking
Provides precise 75 mm linear movement for aligning and stacking battery cells during module assembly.
Tab Handling
Actuates small grippers to move or position battery tabs during the welding process.
Pack Sorting
Pushes or diverts battery packs along conveyors with reliable 402 N force at 0.5 MPa.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X75 the Right Cylinder?
This 32 mm bore generates 402 N of push force at 0.5 MPa. If your battery stacking or handling process requires less force, stepping down is not an option below 32 mm in this family, but if you need more clamping power, consider the 40 mm bore which provides 628 N at 0.5 MPa. For direct replacement, match the 32 mm bore, 75 mm stroke, PT1/8 thread, basic mounting, and non-magnet configuration exactly.
With a 75 mm stroke, side-load stress on the 12 mm rod is relatively low, but always ensure proper alignment to prevent premature rod bearing wear. If the application involves significant lateral loads during cell transport, pair the cylinder with an external guide rail.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X75 FAQ
The B06- prefix indicates this cylinder is part of AirTAC's battery-manufacturing dedicated line. The B06-SC32X75 is mechanically identical to the standard SC32X75, offering the same 32 mm bore, 75 mm stroke, and 402 N push force at 0.5 MPa.
No, the SC series is double-acting and cannot hold position without live air pressure. The adjustable cushion only decelerates the piston at the end of the stroke; it does not function as a brake or locking mechanism. A mechanical lock or external guide is required for holding loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.